Employee personal account

• Notifications
• Profile
• My rating
• My assessments
• My tests
• My courses
• My checks
• My certificates
• My competencies
• My events
• My programs
• Individual development plan

Notifications

This tab displays notifications to a specific user from the application. The following events are added to the notification feed:

• When creating/editing the assignment of courses, tests, 360 assessment, IDP.
• When adding/removing to the list of moderators.
• If an employee is selected to check an open question and someone has passed the test with this open question, then the checker receives a notification that the answer needs to be checked.

Updating the application

This tab contains the “Reset application cache” element (similar to a browser update):

It is recommended to use this element for all cases when it is necessary to refresh the browser window with the application. For example, when you have not worked in the application for a long time, but the window was open. If there was a change in tariff and you need to see the result immediately.

Message Settings

This section is where you configure personal notifications. When it is necessary to send a notification, the application first checks the general notification settings (in the general application settings, available only to moderators). They have priority. If Disabled is selected in the general settings, then notifications will not be sent. If Enabled is selected, then notifications will be sent. If At the discretion of the user is selected, then what is selected in the personal settings of each user will be executed. In this section). Personal notification settings are carried out by each employee in their personal account in the Feed section.

Blue - for all employees, red - only for moderators.

 

Profile

In this tab, the user can enter their work experience, education and upload external certificates.

All entered data is displayed during the search. Thus, you can search for employees with the required experience and education.

My rating

The user's accumulated points and current rating are indicated.

Editing rating levels and points is done in the application settings: "Application settings - Points" and Application settings - "Rating".

My assessments

Myassessments tab:

The tab contains 4 blocks:

• Block for forming the list of evaluators (upper block);
• Block for conducting assessment and self-assessment (tab "I AM THE EVALUATOR");
• Block with assessment results (tab "I AM THE EVALUATOR"). If the option "Publish in the personal account of evaluated was selected when creating the assessment, the results will be in this tab;
• Block for coordinating the list of evaluators, if the employee is selected as the coordinator.

For information. Forming a list of evaluated and evaluators.

The app moderator always adds evaluated (Moderator Menu - 360 Assessment). The evaluated are added when creating a new 360 assessment. There are two ways to form evaluators:

• By the evaluators themselves. The evaluators must also select those who will coordinate this list. The assessment will be launched after the lists have been formed and coordinated.
• By the moderator. When creating an assessment.

A block for forming a list of evaluators (upper block);

If the moderator activated the option “Formation of evaluators list by evaluated individuals” when creating the assessment"

then the employee who is selected as evaluated in this block will have an element for creating a list of evaluators and coordinators this list:

To create a list, you need to click on the plus and in the form that opens, add those who evaluate and coordinate the list:

Block "I am an evaluator".

In this block, the employee acts as the evaluator and gives grades to those employees for whom he is selected as the evaluator.

The assessment is presented as a drop-down list with the name of the evaluated, the title and the assessment period.

After assigning a rating, you can enter comments that will be added to the report.

Reference. Competency management model in the application.

You can create a single-level or two-level competency model in the application.

Single-level competency model:

• Competency 1
• Competency 2

Two-level model:

• Competency 1:
  • Manifestation indicator 1.1
  • Manifestation indicator 1.2 - assessment
  • Competency 2:
  • Manifestation indicator 2.1 - assessment
  • Manifestation indicator 2.2 - assessment

Rating scales. You can create an unlimited number of any rating scales in the application.

Block “I AM THE EVALUED”.

This section presents the results of the employee's assessments when he acted as the evaluated. The results will be available if the moderator activated the item when creating the assessment:

The results contain the following information:

• Name of the evaluated, title and dates of the assessment
• The assessment scale used;
  
• Number of respondents who participated;
• Assessment results (average values);
• Comments.

360 Assessment Application Block.

If the list of evaluators in the assessment is formed by the evaluateds, then the evaluated, in addition to the list itself, must select coodinators. Those employees who will coodinate this list. As a rule, this is the immediate supervisor of the assessee.

If an employee is selected as an coodinator, then it is in this section that the assessment will appear with the list that must be coodinated. The coodinator can coodinate the list, make adjustments to it, or not approve it.

The mechanisms of the 180/360 assessment module are presented in more detail in the section “360 Assessment”.

Rating statuses in the Personal Account:

• Your rating is required;
• Rating given.

 

 

My tests

The section contains 2 blocks of employee tests:

• Assigned tests;
• Passed or in progress.

Assigned tests - tests assigned by the moderator.

Passed or in progress - when you click the "Take" button, the test will move from the "Assigned" section to the "Passed or in progress" section.

When reassigned, the test again goes to the top "Assigned" list.

In the "Completed or in progress" section, you can expand the test with the corresponding element and see all attempts to pass the test:

The list of tests contains the following elements:

• number,
• test name,
• status,
• percentage of correct answers/passing percentage,
• active element for passing the test.

The test can have the following statuses:

• passed/failed;
• assigned/self-recording.

Passed tests can have a "Show results" button. Depends on the settings in the test of the "Test results" field.

If the employee has assigned tests, their number is displayed in the menu in a red circle.

My courses

The section contains 2 blocks of employee courses:

• Assigned courses;
• Completed or in progress.

Assigned courses - courses assigned by the moderator.

Completed or in progress - when you click the "Take" button, the course will move from the "Assigned" section to the "Completed or in progress" section.

When re-assigned, the course will again be included in the top "Assigned" list.

In the "Completed or in progress" section, you can expand the course with the corresponding element and see all attempts to complete the course (lessons and tests):

The list of courses contains the following elements:

number,
course name,
status,
active element for completing the course.
The course statuses can be the following:

passed/not passed;
assigned/self-registration.
The passed tests in the courses can have a "Show results" button. Depends on the settings in the test of the "Test results" field.

If the employee has assigned courses, their number is displayed in the menu in a red circle.

My checks

The section is designed to check open questions in tests:

• If the test contains open questions (questions that require a free-form answer);
• An employee has been selected to check (responsible for) the answers to this question;
• The testee has answered the open question.

If the three conditions above are met, the employee will have a question and an answer to it in their personal account. The answer must be checked and graded.

You can only select two options:

• Correct
• Incorrect.

You can add a comment to the rating. The comment is visible in the test results in reports (to the moderator) and in the examiner's personal account.

You can switch and view the verified answer:

For more details, see the Open Questions section.

My certificates

The certificates that the user received for completing courses/tests in the application are presented.

To display the certificate, click on the arrow, the courses and tests for which there are certificates will be displayed. After selecting a course/test, the certificate will be displayed:

The certificate can be downloaded in jpeg and pdf formats.

You can upload your own template and configure the certificate settings in the application settings: Application settings-Certificates. For more information, see the Certificates section.

My competencies

The personal account displays the Profiles to which the employee has been added:

You can open the profile and see what competencies and indicators of competency manifestation are included in it.

If an employee is selected to approve/coordinate the profile, then the approval/coordination also takes place in the personal account:

Open profile and move the slider to the right, this will mean coordination/approval.

My events

The tab displays all external and in-person events in which the employee participates.

The following elements are available on the page:

- refreshes the page;

  -display of events card as a list or cards.

- Submit an application for participation in an event - if the required event is not in the event catalog, the employee can create an application for a new event. Then, if the moderator approves it, it will appear in the event catalog and other employees will also be able to submit an application for participation in this event.

Event card.

- View event details.

- Add a certificate - you can upload a certificate to the event that is pre-loaded in the certificates tab.

- Fill out the feedback form (if it has been added and activated by the moderator). If the form has been filled out, this information will be displayed.

For more details, see the External/Face-to-Face Events section.

My programs

The personal account shows the programs assigned to the employee. From the personal account, you can view the status of the modules in the program and start completing a particular module of the program.

Clicking on the "Level" element opens/closes the level's contents.

Individual development plan

A) The personal account contains individual employee development plans, as well as those in which the employee is selected as a manager/mentor.

B) If the application settings indicate that the employee can create an IDP themselves, then the button for creating an IEP will be available:

С) The individual development plan contains the following key sections:

• Control elements;
• Employees;
• Additional materials in the form of files;
• Name of competencies. Competencies in turn include:
  • Manifestation indicators;
  • Current and target level of manifestation indicators;
  • Activities aimed at developing manifestation indicators.

D) Controls include:

• Export;
• Delete;
• Publish/Unpublish.

D) The file section looks like this:

E) Next comes a section with competencies and their indicators:

The logic of work and presentation is as follows:

• There is a competence (for example, competence 1);
• It is manifested in indicators (for example, indicator 1.1, indicator 1.2);
• There is a scale with which the current level of development of each indicator and the target level are assessed;
• In order to move to the target level of development of the indicator, development activities must be completed;
• Next, development activities are implemented, and the mentor and/or manager monitor the status of their implementation.
• As a development activity, you can select an event from the proposed list or add a course from the course catalog.

To add a course from the catalog, you need to start typing its name and the application will offer options.